What are the precautions for extending the life of the jigsaw machine?
- Categories:Latest news
- Author:
- Origin:
- Time of issue:2021-05-25
- Views:0
(Summary description)Humidity and temperature:The operating environment humidity of the jigsaw machine should be within the range of 30%~90%;the environment temperature should be 0-45℃,and the principle of temperature change is that no condensation should be caused.
What are the precautions for extending the life of the jigsaw machine?
(Summary description)Humidity and temperature:The operating environment humidity of the jigsaw machine should be within the range of 30%~90%;the environment temperature should be 0-45℃,and the principle of temperature change is that no condensation should be caused.
- Categories:Latest news
- Author:
- Origin:
- Time of issue:2021-05-25
- Views:0
Extending the service life of the jigsaw puzzle is a problem that many users want to know.To extend the service life of the jigsaw puzzle,it is also in terms of operation and use environment.Let's analyze it in detail!
Use environment of jigsaw machine
1.Humidity and temperature:The operating environment humidity of the jigsaw machine should be within the range of 30%~90%;the environment temperature should be 0-45℃,and the principle of temperature change is that no condensation should be caused.
2.The dust concentration shall not be greater than 10mg/m3.
3.Atmospheric environment:no salt,acid gas,corrosive gas,flammable gas and oil mist.
4.Avoid changes in ambient temperature caused by direct sunlight or heat radiation on the splicing machine.
5.The installation location should be far away from the vibration source.
6.The installation location should be far away from flammable and explosive materials.
7.There should be no conductive dust in the splicing machine workshop.
8.There shall be no rain or snow in the jigsaw machine workshop.
9.The ground is flat,clean and free of debris.
10.The aisles are unblocked and there are no obstructions.
11.The indoor light is sufficient to not affect the normal operation of the machine tool.
12,with independent air supply device.
13.There is an independent power supply protection switch.
Matters needing attention when using jigsaw puzzle
1.When the jigsaw machine rotates,the suspension cylinder must be retracted to both sides of the support panel in advance.
2.It is strictly forbidden to clamp the concrete and press it on the material rack to continue forward rotation to avoid major equipment illegal operation accidents.
3.Clean the wooden blocks and other obstructions that clamp the concrete rotation space to make the jigsaw machine run smoothly.
4.The gas supply of the gas circuit should be used closely with the electrical appliances.
5.Adjust the one-way throttle valve to ensure the synchronization of the material rack retreat cylinder,otherwise it will seriously affect the life of the retreat cylinder.6.The first time to join the board should maintain the balance of the equipment cutting,and splice one row at a time.After all the pages are assembled,the board should be removed and the board should be removed to extend the service life of the equipment.
Scan the QR code to read on your phone
Related news
MESSAGES
CONTACT
Add: No. 4, Chufeng 2nd Street, Yantai, Shandong
Tel:+86-535-6530223 6528584
KeLi Zhong:+86-535-13606380129
WeiHua Tang:+86-535-13863845861
Fax:+86-535-6528824
Email:info@hhmg.cn
© HUANGHAI All rights reserved. 鲁ICP备12011002号 Powered by: 300.cn