Address: No. 4, Chufeng 2nd Street, Yantai, Shandong
KeLi Zhong: 18615357959
WeiHua Tang: 18615357957
MXB3525/MXB3530 Automatic finger shaper for beams
1.The machine integrates trimming,milling teeth,waste crushing and deburring and other functions into one,trimming,deburring,crushing device and cutting blades are directly fixed to the motor,the cutting position can be adjusted to ensure the verticality of cross-section.
2.The dual high-speed shaft for milling teeth can be adjusted up or down according to actual requirement;the high-speed spindles applies accurate dynamic balance and sealed oil bearings to ensure machining accuracy.
3.Workbench of the manchine adopts imported rails,bearings to make it run smoothly.Rail,bearing has long service life.
4.The timber clamping device,using clamping and pneumatic sensor detection,making it safe and reliable.
5.The workbench is driven by hydraulic cylinder,travel speed can be individually adjusted,the forward speed is adjusted by one-way throttle valva mainly based on cutting amount;the backward includes rapid return and delecration to smooth stop.Additional material supporting device moving with the workbench,the machine has features of high efficiency and low labor intensity.
|Max working width||500mm||500mm|
|Min working length||250mm||250mm|
|Motor power of shaping||15kw*2||22Kw*2|
|Shaper spindle dia||Φ70||Φ70|
|Shaper spindle speed||6500rpm||6500rpm|
|Motor power for cutting-off||5.5kw||5.5kw|
|Cutting-off saw speed||2800rpm||2800rpm|
|Saw blade dia for cutting-off||Φ350||Φ350|
|Scoring saw dia||Φ150||Φ150|
|Scoring saw speed||2800rpm||2800rpm|
|Hydraulic system power||2.2kw||2.2kw|
|Hydraulic system pressure||1-3Mpa||1-3Mpa|
|Pressure of air system||0.6Mpa||0.6Mpa|
|Working table size||700 * 650mm||700 * 650mm|
Add: No. 4, Chufeng 2nd Street, Yantai, Shandong